Product Description
Vision 353 Turbine Matte Black 6 Lug Replacement Center Cap C353MB-6V
Replace a missing, damaged, cracked, or faded wheel cap with this genuine-style Vision 353 Turbine matte black center cap. Identified by manufacturer part number C353MB-6V, this cap is designed for compatible six-lug versions of the Vision Wheel 353 Turbine.
The approximately 5.25-inch outside diameter, matte black finish, recessed Vision logo, and bolt-on mounting design restore the original finished appearance of your wheel. Two mounting screws are included for installation.
Important: A center cap fits the wheel—not simply the vehicle. Confirm the part number, measurements, bolt pattern, mounting points, and wheel style before ordering.
Quick Fitment Check
This is the correct cap when:
- Your wheel is a six-lug Vision 353 Turbine.
- The original cap number is C353MB-6V.
- Your wheel has a 6x135 or 6x5.5/6x139.7 bolt pattern.
- The cap measures approximately 5.25 inches across the outside face.
- The two mounting-screw locations match your wheel.
Product Specifications
| Brand | Vision Wheel |
| Wheel model | Vision 353 Turbine |
| Manufacturer part number | C353MB-6V |
| UPC | 886821202591 |
| Finish | Matte black |
| Outside diameter | Approximately 5.25 inches |
| Lug configuration | 6 lug |
| Compatible bolt patterns | 6x135 and 6x5.5/6x139.7 Vision 353 wheels |
| Attachment | Bolt-on with two screws |
| Material | Automotive-grade plastic |
| Logo | Vision logo |
| Condition | New |
| Quantity | One center cap |
Fits Vision 353 Turbine Six-Lug Wheels
Vision identifies C353MB-6V as the center-cap number for compatible six-lug, matte black Vision 353 Turbine wheels. Six-lug versions of this wheel were produced in the following bolt patterns:
- 6x135
- 6x5.5 / 6x139.7
These wheel patterns are commonly used on trucks and SUVs such as the Ford F-150, Expedition, Chevrolet Silverado, GMC Sierra, Tahoe, Suburban, Yukon, Toyota Tacoma, 4Runner and other applications. However, the vehicle bolt pattern alone does not confirm center-cap fitment.
This cap only fits compatible Vision 353 Turbine wheels. It does not automatically fit factory wheels, other wheel brands, every Vision wheel, or every vehicle using a 6x135 or 6x139.7 bolt pattern.
How to Verify C353MB-6V Fitment
- Remove one original center cap from your wheel.
- Check the back for part number C353MB-6V.
- Confirm that your wheel is a six-lug Vision 353 Turbine.
- Measure the cap across its widest outside point. It should measure approximately 5.25 inches.
- Compare the front design, rear shape, depth, and two mounting-screw locations with the listing photographs.
Wheel manufacturers sometimes use different caps on wheels that look similar. Matching the molded part number on the back of the original cap is the most reliable way to verify fitment.
What Is Included?
- One Vision C353MB-6V center cap
- Two center-cap mounting screws
This listing is for one center cap, not a set of four. The wheel, tire, lug nuts, and vehicle shown in any application photographs are not included.
Why Replace a Missing Vision Turbine Center Cap?
- Restores the complete appearance of the wheel
- Covers the exposed hub and lug area
- Replaces a lost, cracked, faded, or damaged original cap
- Matches compatible matte black Vision 353 Turbine wheels
- Avoids replacing an otherwise usable wheel
- Includes the two screws required for attachment
Installation
Position the cap over the wheel center and align its two mounting holes with the threaded mounting points in the wheel. Start both screws by hand before tightening. Tighten the screws evenly and only until the cap is secure.
Do not overtighten. Excessive force can damage a plastic cap or its mounting points. Check the cap periodically to make sure it remains secure.
Need Help Confirming Your Center Cap?
Send us a clear picture of the wheel and the back of your original cap.
Call or text A2i Wheel & Tire at 616-330-6600
Why Buy From A2i Wheel & Tire?
- More than 20 years of wheel-industry experience
- Specialists in hard-to-find OEM and aftermarket center caps
- Free standard shipping within the continental United States
- Free returns subject to the posted return policy
- Fast order processing
- Fitment support before and after your purchase
Order the Vision 353 Turbine C353MB-6V replacement center cap today and restore the finished appearance of your wheel.
Frequently Asked Questions
What wheel uses the C353MB-6V center cap?
C353MB-6V is designed for compatible six-lug versions of the matte black Vision 353 Turbine wheel.
Does C353MB-6V fit both 6x135 and 6x5.5 wheels?
It is used on compatible Vision 353 Turbine wheels in 6x135 and 6x5.5/6x139.7 configurations. Bolt pattern alone does not confirm fitment.
Will this cap fit factory Ford, Chevrolet, GMC, Nissan or Toyota wheels?
No factory-wheel fitment is implied. This replacement cap is designed for compatible Vision 353 Turbine aftermarket wheels.
Does this cap fit other Vision wheel models?
Do not assume that it does. Vision uses different caps across its wheel collection. Verify that the original cap number is C353MB-6V.
What is the center cap’s diameter?
The outside diameter is approximately 5.25 inches. Measure your original cap and compare its mounting design before ordering.
Are mounting screws included?
Yes. Two screws are included to attach the cap to a compatible wheel.
Is this listing for one cap or a set of four?
This listing includes one replacement center cap.
