Product Description
Fuel 8x6.5 Baja Beast Podium Vector Vengeance Matte Black Center Cap 1003-50MB
Replace a missing, damaged, faded, or worn wheel center cap with this Fuel Off-Road 1003-50MB Matte Black Replacement Center Cap. This Fuel center cap is designed for select 8-lug / 8x165.1 / 8x6.5 Fuel wheel applications and is associated with select Fuel Baja, Beast, Podium, Vector, and Vengeance wheel applications.
The primary part number is 1003-50MB and the UPC is 885463909196. This version features a matte black finish with a contrasting Fuel logo and uses a front snap-in retention design.
FREE SHIPPING + FREE RETURNS from A2i Wheel & Tire.
Product Features
- Fuel Off-Road replacement wheel center cap
- Part Number: 1003-50MB
- Reference / Casting Number: 1003-50
- UPC: 885463909196
- Finish: Matte Black
- Logo: Fuel Logo
- Mounting Style: Front Snap-In
- Retention: 6 Retention Clips
- Approximate Size: 5 Inches
- Known Application: Select 8 Lug Fuel Wheels
- Known Bolt Pattern: Select 8x165.1 / 8x6.5 Fuel Wheels
- Known Wheel Families: Select Baja, Beast, Podium, Vector, and Vengeance applications
- Condition: New
- Quantity: 1 Center Cap
Fuel 1003-50MB Center Cap
The 1003-50MB part number is the most important identifier when replacing this Fuel Off-Road center cap. Fuel manufactured numerous center caps that can look similar from the front but use different diameters, depths, finishes, and mounting systems.
If your original cap is marked 1003-50MB, compare its dimensions, finish, rear clips, and overall profile to this replacement before ordering.
Fuel 1003-50 Center Cap Reference
The number 1003-50 can also appear as a casting or reference number associated with this center cap family. The complete 1003-50MB identification is preferable when identifying the matte black version.
Do not assume every Fuel center cap marked 1003-50 is the same finish. Fuel produced multiple finish variations within this center cap family.
Fuel 8x6.5 / 8x165.1 Center Cap
This 1003-50MB listing is intended for select Fuel 8-lug wheel applications using the 8x165.1 / 8x6.5 bolt pattern and this specific center cap design.
8x165.1 and 8x6.5 describe the same bolt pattern. However, bolt pattern alone does not determine center cap fitment. Many different Fuel wheels were produced in 8x6.5 with different center bores and center caps.
Always verify 1003-50MB whenever possible.
Fuel Baja Center Cap
The 1003-50MB is associated with select Fuel Baja wheel applications. If you are searching for a Fuel Baja center cap or Fuel Baja 8x6.5 center cap, inspect the back of your original cap for 1003-50MB and compare its dimensions and retention clips.
Fuel Beast Center Cap
Select Fuel Beast wheel applications use the 1003-50MB center cap design. Because Fuel Beast wheels were produced in multiple sizes and configurations, do not order solely by the Beast wheel name.
Match the complete center cap part number and physical design before purchasing.
Fuel Podium Center Cap
The 1003-50MB is also associated with select Fuel Podium applications. Customers searching for a missing Fuel Podium center cap should compare their existing cap to the 1003-50MB part number, approximately 5-inch size, matte black finish, and snap-in retention system.
Fuel Vector Center Cap
If your truck is equipped with compatible Fuel Vector wheels, the 1003-50MB may be the replacement center cap required for select 8x6.5 applications.
Fuel manufactured Vector wheels in different configurations, so the wheel model alone should not be used as the final fitment test.
Fuel Vengeance Center Cap
The Fuel 1003-50MB is also associated with select Fuel Vengeance wheel applications. Verify the original center cap part number and physical measurements before ordering a replacement.
Matte Black Fuel Center Cap With Contrasting Logo
This version of the 1003-50 center cap family features a matte black finish with a contrasting Fuel logo.
Finish is especially important with this center cap family because Fuel offered visually similar 1003-50 caps in multiple colors and finishes.
Fuel 1003-50 Center Cap Finish Variations
Several finish variations exist within the Fuel 1003-50 center cap family. These include:
- 1003-50 - Chrome version
- 1003-50MB - Matte Black version
- 1003-50GB - Gloss Black version
- Additional 1003-50 finish variations may also exist
Do not order based only on the base 1003-50 number. Match the complete part number and desired finish whenever possible.
Snap-In Mounting Design
The 1003-50MB uses a front snap-in mounting system. Published replacement-cap specifications identify six retention clips on the rear of the cap.
This mounting design leaves the lug nuts exposed and allows the center cap to snap directly into the compatible wheel center opening.
Compare the rear clip configuration of your original cap to the product photos before ordering.
Center Cap Measurements
This A2i Wheel & Tire listing identifies the cap at approximately 5 inches. Published replacement-cap measurements vary slightly depending on where the cap is measured.
One published source lists approximately 5-1/8 inches in diameter and 3-9/16 inches tall, while another measures approximately 5 inches across the rear and 3-7/8 inches tall.
Because these measurements may be taken at different points on the cap, we recommend matching the exact 1003-50MB part number and comparing your original cap directly to the product photos.
Specifications
- Brand: Fuel Off-Road
- Part Number: 1003-50MB
- Reference / Casting Number: 1003-50
- UPC: 885463909196
- Finish: Matte Black
- Logo: Fuel Logo
- Approximate Size: 5 Inches
- Mounting: Front Snap-In
- Retention: 6 Clips
- Known Lug Application: 8 Lug
- Known Bolt Pattern: Select 8x165.1 / 8x6.5
- Known Wheel Families: Select Baja, Beast, Podium, Vector, Vengeance Applications
- Condition: New
- Product Type: Wheel Center Cap / Hub Cap
- Quantity: 1 Center Cap
How to Verify Fuel 1003-50MB Fitment
- Remove one of your existing Fuel center caps.
- Inspect the back for a molded, stamped, printed, or sticker part number.
- Look specifically for 1003-50MB or the 1003-50 casting/reference.
- Confirm that your original cap has the same matte black finish.
- Measure your existing cap and compare it to the approximately 5-inch size.
- Confirm that your original cap uses the same front snap-in design.
- Compare the six rear retention clips.
- Compare the overall cap height and profile.
- Compare the front and rear of your original cap to the product photos.
Why Matching the Exact Part Number Matters
Fuel Off-Road produced many replacement center caps that look very similar. A cap can have the correct Fuel logo, color, and approximate diameter while still having a different mounting system or depth.
The safest replacement method is to match the complete 1003-50MB part number, finish, dimensions, retention clips, and overall physical design.
Important Vehicle Fitment Information
This center cap fits the wheel, not the vehicle. A Chevrolet Silverado, GMC Sierra, Ford truck, Dodge Ram, or other 8-lug vehicle can be equipped with many different Fuel wheels.
Do not purchase this center cap solely because your vehicle has an 8x6.5 bolt pattern. Your wheel must use the compatible Fuel 1003-50MB center cap design.
Why Buy From A2i Wheel & Tire?
- FREE Shipping
- FREE Returns
- Large inventory of Fuel Off-Road replacement center caps
- Hard-to-find aftermarket wheel center caps
- Part-number-based center cap identification
- Wheel and center cap fitment specialists
- Shipping from our Michigan warehouse
- Serving wheel customers since 2009
Need help identifying your Fuel center cap?
Call or Text 616-330-6600. Send us a clear picture of your wheel and the front and back of your existing center cap and we can help identify the correct replacement.
Frequently Asked Questions
What is Fuel center cap 1003-50MB?
Fuel 1003-50MB is a matte black snap-in replacement wheel center cap used on select Fuel Off-Road wheel applications.
What is the UPC for Fuel 1003-50MB?
The UPC for this Fuel 1003-50MB center cap is 885463909196.
Does 1003-50MB fit Fuel 8x6.5 wheels?
1003-50MB is associated with select Fuel 8x165.1 / 8x6.5 wheel applications. Bolt pattern alone does not guarantee center cap fitment, so match the exact center cap part number.
Does 1003-50MB fit Fuel Baja wheels?
It is associated with select Fuel Baja wheel applications. Verify the 1003-50MB part number and physical dimensions before ordering.
Does 1003-50MB fit Fuel Beast wheels?
It is associated with select Fuel Beast applications. Because different Beast wheel configurations may use different caps, match your original cap to 1003-50MB.
Does 1003-50MB fit Fuel Podium wheels?
1003-50MB is associated with select Fuel Podium wheel applications. Match the exact part number, dimensions, finish, and mounting design.
Does 1003-50MB fit Fuel Vector wheels?
1003-50MB is associated with select Fuel Vector wheel applications. Verify the original cap before ordering.
Does 1003-50MB fit Fuel Vengeance wheels?
1003-50MB is associated with select Fuel Vengeance wheel applications. Match the complete part number and physical cap design.
Is 1003-50MB a snap-in center cap?
Yes. Published specifications identify 1003-50MB as a front snap-in center cap using six retention clips.
Can I determine fitment from my vehicle?
No. Center caps fit the wheel rather than the vehicle. Match the Fuel wheel and exact 1003-50MB center cap part number before ordering.
