Product Description
Fuel 1005-49TGD Gunmetal Black 8 Lug Center Cap – D806 Flame D848 Rebar D680 Rebel 5.25"
Replace a missing, damaged, or worn center cap with this Fuel Off-Road 1005-49TGD replacement wheel center cap. This matte black and gunmetal gray 8-lug Fuel center cap is used on select Fuel wheels, with documented applications including D806 Flame, D848 Rebar, and D680 Rebel wheels.
The primary part number is 1005-49TGD. This A2i Wheel & Tire center cap measures approximately 5.25 inches in diameter and uses a snap-in mounting design. Published replacement-cap measurements place the cap at approximately 3.75 to 3.875 inches tall.
One of the strongest documented applications for 1005-49TGD is select Fuel 8x170 wheel configurations. Always match the complete part number, dimensions, rear retention design, and wheel configuration before ordering.
FREE SHIPPING + FREE RETURNS from A2i Wheel & Tire.
Product Features
- Fuel Off-Road replacement wheel center cap
- Primary Part Number: 1005-49TGD
- Additional References: 1005-49 / 1005-58
- Other Published References: 1005-49SGD / ST1902-02 / ST1902-04
- Finish: Matte Black / Gunmetal Gray
- Diameter: Approximately 5.25 Inches
- Height: Approximately 3.75-3.875 Inches
- Mounting Style: Snap-In
- Lug Application: 8 Lug
- Strongly Documented Bolt Pattern: 8x170
- Known Wheel Models: Select D806 Flame, D848 Rebar, D680 Rebel and additional Fuel applications
- Condition: New
- Quantity: 1 Center Cap
Fuel 1005-49TGD Center Cap
The 1005-49TGD part number is the most important identifier when replacing this Fuel Off-Road center cap. Fuel manufactures several center caps within the 1005-49 family that look extremely similar but can have different finishes, depths, bolt-pattern applications, and wheel fitments.
If your original center cap is marked 1005-49TGD, compare its finish, diameter, height, rear retention system, and overall profile to this replacement before ordering.
Fuel D806 Flame Center Cap
The 1005-49TGD is directly documented on select Fuel D806 Flame wheels with the 8x170 bolt pattern.
Known D806 Flame applications using 1005-49TGD include:
- D80620901757 – 20x9 8x170 +20
- D80620901750 – 20x9 8x170 +1
- D80620001747 – 20x10 8x170 -18
Important: Not every D806 Flame uses this center cap. For example, other D806 bolt patterns can use different cap numbers. Match the exact wheel configuration and 1005-49TGD part number.
Fuel D848 Rebar Center Cap
The 1005-49TGD is also documented on select Fuel D848 Rebar wheels.
A confirmed application is:
- D84820001747 – 20x10 8x170 -18
This makes 1005-49TGD an important replacement search for customers looking for a Fuel D848 Rebar 8x170 center cap.
Do not assume every D848 Rebar uses 1005-49TGD. The 20x10 8x180 D848 configuration, for example, is documented with a different center cap part number.
Fuel D680 Rebel Center Cap
The 1005-49TGD is strongly associated with select Fuel D680 Rebel wheel applications. Multiple replacement-cap catalogs identify 1005-49TGD specifically as a D680 Rebel replacement center cap.
If you are replacing a center cap on a Fuel D680 Rebel wheel, match the 1005-49TGD number on your original cap before ordering.
Additional Fuel Rebel and Clash Applications
Published replacement-cap catalogs also associate the 1005-49TGD design with select D679 Rebel, D681 Rebel, and D762 Clash wheel applications.
Because these Fuel wheel families were produced in multiple bolt patterns and configurations, these wheel names should be treated as select applications only. Match the complete 1005-49TGD part number and physical cap design before ordering.
Fuel 8x170 Center Cap
The 1005-49TGD has strong documented fitment on select Fuel wheels using the 8x170 bolt pattern, including D806 Flame and D848 Rebar configurations.
However, 8x170 alone does not determine center cap fitment. Many Fuel 8x170 wheels use different center cap designs.
Important 8x170 vs. 8x180 Difference
8x170 and 8x180 are different wheel bolt patterns and should never be treated as interchangeable.
Fuel sometimes uses different center cap part numbers when the same wheel model changes bolt pattern. For example, a documented D848 Rebar 20x10 8x170 uses 1005-49TGD, while the comparable 20x10 8x180 configuration uses 1005-49GD.
This is why matching the exact wheel configuration and center cap part number is essential.
Matte Black and Gunmetal Fuel Center Cap
The 1005-49TGD features a matte black and gunmetal gray finish. This gunmetal treatment helps distinguish it from other visually similar Fuel 1005-49 center caps with black, bronze, gloss black, or other accent finishes.
Fuel 1005-49 Center Cap Family
Fuel uses multiple center caps based around the 1005-49 family. Similar part numbers should not automatically be considered interchangeable.
Different 1005-49 versions can correspond to different finishes, logos, wheel configurations, or bolt-pattern applications. Always prioritize the complete 1005-49TGD part number.
5.25-Inch Fuel Center Cap
A2i Wheel & Tire identifies this cap at approximately 5.25 inches in diameter. Published replacement-cap measurements commonly show approximately 5 inches across the rear mounting area, illustrating why measurement location can produce slightly different numbers.
When comparing your original cap, measure the overall outside diameter as well as the rear mounting area.
Fuel Snap-In Center Cap
The 1005-49TGD is identified in published catalog data as a snap-in center cap. The rear retention design secures the cap to the compatible wheel without using the bolt-on arrangement found on some other Fuel center caps.
Compare the rear retention tabs, diameter, depth, and overall profile to your original cap before ordering.
Specifications
- Brand: Fuel Off-Road
- Primary Part Number: 1005-49TGD
- Additional References: 1005-49 / 1005-58
- Other Published References: 1005-49SGD / ST1902-02 / ST1902-04
- Finish: Matte Black / Gunmetal Gray
- Overall Diameter: Approx. 5.25 Inches
- Published Rear Diameter: Approx. 5 Inches
- Published Height: Approx. 3.75-3.875 Inches
- Mounting: Snap-In
- Lug Application: 8 Lug
- Strongly Documented Bolt Pattern: 8x170
- Known Wheel Models: Select D806 Flame / D848 Rebar / D680 Rebel
- Additional Published Applications: Select D679 Rebel / D681 Rebel / D762 Clash
- Condition: New
- Product Type: Wheel Center Cap / Hub Cap
- Quantity: 1 Center Cap
How to Verify Fuel 1005-49TGD Fitment
- Remove one of your existing Fuel center caps.
- Inspect the back for a molded, stamped, printed, or sticker part number.
- Look specifically for 1005-49TGD.
- Identify your Fuel wheel model if possible.
- Verify the wheel size and bolt pattern.
- Confirm the matte black and gunmetal gray finish.
- Measure the overall cap diameter and compare it to approximately 5.25 inches.
- Compare the rear mounting diameter and cap height.
- Confirm the same snap-in retention design.
- Compare the front and back of your original cap directly to the product photos.
Why Matching 1005-49TGD Matters
Fuel center caps can look nearly identical from the front while using different finishes, mounting designs, depths, and wheel applications.
The safest replacement method is to match the complete 1005-49TGD part number, finish, dimensions, mounting design, and wheel configuration.
Important Vehicle Fitment Information
This center cap fits the wheel, not the vehicle. Ford Super Duty and other 8-lug trucks can be equipped with many different aftermarket Fuel wheels and center caps.
Do not order solely because your vehicle uses an 8x170 bolt pattern. Your Fuel wheel must use the compatible 1005-49TGD center cap.
Why Buy From A2i Wheel & Tire?
- FREE Shipping
- FREE Returns
- Large inventory of Fuel Off-Road replacement center caps
- Hard-to-find aftermarket wheel center caps
- Part-number-based center cap identification
- Wheel and center cap fitment specialists
- Shipping from our Michigan warehouse
- Serving wheel customers since 2009
Need help identifying your Fuel center cap?
Call or Text 616-330-6600. Send us a clear picture of your wheel and the front and back of your existing center cap and we can help identify the correct replacement.
Frequently Asked Questions
What wheels does Fuel 1005-49TGD fit?
Fuel 1005-49TGD is used on select Fuel 8-lug wheels. Documented applications include select D806 Flame, D848 Rebar, and D680 Rebel wheels, with additional replacement catalogs associating it with select D679 Rebel, D681 Rebel, and D762 Clash applications.
Does 1005-49TGD fit Fuel D806 Flame wheels?
Yes. 1005-49TGD is documented on select Fuel D806 Flame 8x170 wheels, including 20x9 and 20x10 configurations.
Does 1005-49TGD fit Fuel D848 Rebar wheels?
Yes. 1005-49TGD is documented on select Fuel D848 Rebar 8x170 wheels. Other D848 bolt patterns can use different center caps.
Does 1005-49TGD fit Fuel D680 Rebel wheels?
Yes. Multiple replacement-cap catalogs specifically identify 1005-49TGD as a replacement center cap for select Fuel D680 Rebel wheels.
Does Fuel 1005-49TGD fit 8x170 wheels?
It is used on select Fuel 8x170 wheels. Bolt pattern alone does not guarantee center cap fitment, so match the complete 1005-49TGD part number.
Does Fuel 1005-49TGD fit 8x180 wheels?
Some replacement catalogs associate this cap design with select applications beyond 8x170, but Fuel wheel-level data shows that many 8x180 versions use different center caps. Match the exact wheel and part number before ordering.
What size is Fuel 1005-49TGD?
A2i Wheel & Tire identifies the cap at approximately 5.25 inches overall diameter. Published measurements show approximately 5 inches across the rear and approximately 3.75 to 3.875 inches tall.
What color is Fuel 1005-49TGD?
1005-49TGD has a matte black and gunmetal gray finish.
Is Fuel 1005-49TGD a snap-in center cap?
Yes. Published catalog information identifies 1005-49TGD as a snap-in Fuel center cap.
Can I determine 1005-49TGD fitment from my truck?
No. Center caps fit the wheel rather than the vehicle. Match the exact Fuel wheel, 1005-49TGD part number, dimensions, finish, and mounting design.
